Qlogic QLogic 12000 Series Guía de instalación Pagina 19

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 114
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 18
1–Installation
12200/12300 Installation
D000102-000 B 1-9
Figure 1-6 Insert Management Module 4
Four Post Standard-Depth Rack Installation
In a standard-depth rack, the distance between the front and back mounting posts
is ~28" (700mm). Mounting rails for the 12200 and 12300 are adjustable to
accommodate racks with 26"-33" between mounting posts.
Mounting Hardware Kit Contents:
One pair of mounting rails adjustable for 26"-33" installation range
One pair of hat rails, left and right
#6-32 screws
M6 cage nuts
•M6 screws
Installation
1. Install the hat rails on each side of the switch using three (3) #6-32 screws per
rail. Torque screws to 8in-lb. A typical installation is shown in Figure 1-7. On
the 12300, hat rails are installed with mounting ears towards the power supply
Vista de pagina 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 113 114

Comentarios a estos manuales

Sin comentarios