Qlogic Fibre Channel HBA and VM Información técnica Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 92
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
3 From the Emulex main menu:
a Select the same adapter.
b Select <1> Configure Boot Devices.
c Select the location for the Boot Entry.
d Enter the two-digit boot device.
e Enter the two-digit (HEX) starting LUN (for example, 08).
f Select the boot LUN.
g Select <1> WWPN. (Boot this device using WWPN, not DID).
h Select <x> to exit and <Y> to reboot.
4 Boot into the system BIOS and move Emulex first in the boot controller sequence.
5 Reboot and install on a SAN LUN.
Chapter 5 Using Boot from SAN with ESX Systems
VMware, Inc. 49
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 91 92

Comentarios a estos manuales

Sin comentarios