Qlogic QLE4062C Manual de usuario Pagina 6

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 11
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 5
White Paper
6. Reboot Solaris to let the newly added LUNs be found.
7. Run the following command after reboot.
# grep qla4xxx /var/adm/messages
...
Feb 10 10:30:19 hostname:[ID xxxxxx kernel.info] sd10 at qla4xxx target2
lun0
...
The message indicates the SCSI device entry which is created in
/kernel/drv/sd.conf file. This file must be set properly; otherwise the iSCSI
target would not be detected. Here are two examples for reference.
Example 1: Connect to P210C with two IP portals shared the same nodename.
Attach to 3 LUNs which are LUN 0, 1, 254.
After connecting the iSCSI target with QLogic QLE4062C, the messages are
displayed like the following.
- 6 -
Vista de pagina 5
1 2 3 4 5 6 7 8 9 10 11

Comentarios a estos manuales

Sin comentarios