Qlogic QLogic Fibre Channel Switch Guía de instalación Pagina 150

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 206
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 149
B – Command Line Interface
Set Setup Command
B-54 59055-00 B
D
TrapCommunity (string, max=32 chars) [public ]
AuthFailureTrap (True / False) [False ]
ProxyEnabled (True / False) [True ]
The following is an example of the Set Setup System command:
SANbox (admin) #> set setup system
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Eth0NetworkDiscovery (1=Static, 2=Bootp, 3=Dhcp, 4=Rarp) [Static ]
Eth0NetworkAddress (dot-notated IP Address) [10.0.0.1 ]
Eth0NetworkMask (dot-notated IP Address) [255.255.255.0]
Eth0GatewayAddress (dot-notated IP Address) [10.0.0.254 ]
AdminTimeout (dec value 0-1440 minutes, 0=never) [30 ]
TempMonitoringWarning (dec value 0-100 degrees Celsius) [65 ]
TempMonitoringFailure (dec value 0-100 degrees Celsius) [70 ]
TempFailurePortShutdown (True / False) [False ]
UserAuthentication (True / False) [False ]
LocalLogEnabled (True / False) [True ]
RemoteLogEnabled (True / False) [False ]
RemoteLogHostAddress (dot-notated IP Address) [10.0.0.254 ]
Vista de pagina 149
1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 205 206

Comentarios a estos manuales

Sin comentarios