Qlogic iSR6200 Intelligent Storage Guía de instalación descargar pdf (Pagina 5)

Step 2. Complete the Pre-Installation Checklist

During the initial configuration process, the system prompts you to enter information for each blade contained in the

iSR6200. Use the spaces provided in Table 1 and Table 2 to record the IP addresses for each blade.

Table 1. Worksheet for Router Blade 1 (left) Parameters

Symbolic name of the iSR6200 Blade 1

Management port IP address, subnet

mask, and gateway (if not using DHCP)

iSCSI port 1 IP address, subnet mask,

and gateway (GE-1)

IP address of the Internet simple name

service (iSNS) server for iSCSI port 1 (if

iSNS will be enabled)

iSCSI port 2 IP address, subnet mask,

and gateway (GE-2)

IP address of the iSNS server for iSCSI

port 2 (if iSNS will be enabled)

iSCSI port 3 IP address, subnet mask,

and gateway for the optional (FC3, GE-3,

or 10GE-3) port

IP address of the iSNS server for iSCSI

port 3 (if iSNS will be enabled)

iSCSI port 4 IP address, subnet mask,

and gateway for the optional (FC4, GE-4,

or 10GE-4) port

IP address of the iSNS server for iSCSI

port 4 (if iSNS will be enabled)

Table 2. Worksheet for Router Blade 2 (right) Parameters

Symbolic name of the iSR6200 Blade 2

Management port IP address, subnet

mask, and gateway (if not using DHCP)

iSCSI port 1 IP address, subnet mask,

and gateway (GE-1)

IP address of the iSNS server for iSCSI

port 1 (if iSNS will be enabled)

iSCSI port 2 IP address, subnet mask,

and gateway (GE-2)

IP address of the iSNS server for iSCSI

port 2 (if iSNS will be enabled)

1 2 3 4 5 6 7 8 9 10 ... 19 20

Sin comentarios

Qlogic iSR6200 Intelligent Storage Guía de instalación Pagina 5