Qlogic QLA2342 Guía de usuario descargar pdf (Pagina 58)

EMC Fibre Channel with QLogic Host Bus Adapters in the Solaris Environment

Configuring a Boot Device on the EMC Storage Array

6. Change to the root directory of the LUN you have set up and

dump the O/S:

Example:

cd /bootarray

ufsdump 0f - /dev/dsk/c0t0d0s0 | ufsrestore rf -

Repeat this for each partition you created.

7. Record the complete path of the boot LUN by running the

following command:

ls -l /dev/dsk/emcpower0a

Output from command:

Record the

/pseudo/emcp@0:a,blk.

8. Once the dump is done, edit

/bootarray/etc/vfstab to change

the original partitions to reflect the partitions on the new boot

disk.

Example:

vi /bootarray/etc/vfstab

Change the lines shown in bold below as follows:

Before:

lrwxrwxrwx 1 root other 33 Jun 4 09:06 /dev/dsk/emcpower0a ->

../../devices/pseudo/emcp@0:a,blk

#device device mount FS fsck mount mount

#to mount to fsck point type pass at boot options

#/dev/dsk/c1d0s2 /dev/rdsk/c1d0s2 /usr ufs 1 yes -

fd - /dev/fd fd - no -

/proc - /proc proc - no -

/dev/dsk/c0t0d0s1 - - swap - no -

/dev/dsk/c0t0d0s0 /dev/rdsk/c0t0d0s0 / ufs 1 no -

/dev/dsk/c0t0d0s6 /dev/rdsk/c0t0d0s6 /usr ufs 1 no -

swap - /tmp tmpfs - yes -

1 2 ... 53 54 55 56 57 58 59 60 61 62

Sin comentarios

Qlogic QLA2342 Guía de usuario Pagina 58