Qlogic SANsurfer iSCSI HBA CLI Guía de usuario descargar pdf (Pagina 38)

4 – Interactive Mode Commands

HBA Options Menu

4-16 SN0054621-00 B

■ iSCSI_Strict_Login

■ iSCSI_Alias

Each setting is displayed with the current value in brackets, for example:

iSCSI_Snack [off] :

To change the value, type the new value after the prompt. To keep the current value,

press ENTER at the prompt. The next iSCSI setting displays. The settings are

displayed one-by-one, in the order shown in the above list.

These settings are described in table 4-1.

4.4.2.3.3

Configure Firmware Settings

This option allows you to modify the following firmware settings:

■ FW_ZIO_Enable_Mode

■ AFW_Device_Timeouts

■ AFW_Delayed_ACK

■ AFW_AutoConnect

Each setting is displayed with the current value in brackets, for example:

AFW_Device_Timeouts [on] :

To change the value, type the new value after the prompt. To keep the current value,

press ENTER at the prompt. The next firmware setting displays. The settings are

displayed one-by-one, in the order shown in the above list.

These settings are described in table 4-1.

4.4.2.3.4

Configure Device Settings

This option allows you to modify the following device settings:

■ iSCSI_Snack

■ iSCSI_Discovery_Logout

■ iSCSI_Strict_Login

■ TCP_SLP_Use_DA

■ TCP_Auto_Discovery

■ TCP_SLP_UA

■ TCP_SLP_SA

■ TCP_DHCP

■ TCP_DNS_Via_DHCP

■ TCP_SLP_SA_Via_DHCP

■ TCP_Nagle

■ iSCSI_Alias

■ IP_Address

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 79 80

Sin comentarios

Qlogic SANsurfer iSCSI HBA CLI Guía de usuario Pagina 38