Qlogic QLA4010 Guía de instalación descargar pdf (Pagina 45)

Booting from the External Storage Array

1-31

Installation and Configuration

Find the driver handle numbers which correspond to those listed for

the QLogic HBAs (as shown in Figure 1-28 on page 1-30). Note the

two digits (proceeded by Ctrl, as shown in Figure 1-28) next to the

driver handles for the QLogic HBAs, these are control handles.

Determine the HBA instance which will be used for boot, and enter

the QLogic Fibre Channel Driver Configuration Utility by typing

drvcfg -s <driver handle> <control handle> (where "driver handle"

and "control handle" are the values which correspond to the HBA

instance which will be used for boot. In this example, "

drvcfg -s 5f

" would be used) and pressing Enter.

Figure 1-29 Fibre Channel Driver Configuration Utility

The Fibre Channel Driver Configuration Utiliity Menu will be

displayed (as shown in Figure 1-29).

Type 1 (Edit Adapter Settings) and press Enter.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 117 118

Sin comentarios

Qlogic QLA4010 Guía de instalación Pagina 45