Qlogic QLA4010 Guía de instalación descargar pdf (Pagina 46)

1-32

EMC Fibre Channel and iSCSI with QLogic HBAs in the Windows Environment

Installation and Configuration

Figure 1-30 Edit Adapter Settings

By default, option 1 (Enable Hard Loop ID") is disabled.

◆ In FC-SW environments, the default of "disabled" is the proper

setting. Select 2. Auto Topology: Pt to Pt first. Press Enter when

your choice has been selected. The "Topology" information

toward the top of the screen will reflect your selection. Press

<Escape> to return to the previous configuration window.

◆ In FC-AL/"direct attach" environments, Hard Loop ID should be

enabled; type 1 and press Enter. The utility will prompt to

"Enable Hard Loop Id [n]?"; type "y" and press Enter. Enable

Hard Loop Id will now be shown as [y] (enabled). Type "0" and

press Enter to return to the previous menu as shown in

Figure 1-29 on page 1-31.

Figure 1-31 Connection Option

By default, option 6 (Connection option) setting of "Loop Preferred,

Otherwise Point To Point", is acceptable for most configurations, and

will auto-detect the connection topology. To manually set the

connection topology, type 6 and press Enter; otherwise, type 0 and

press Enter to return to the previous menu as shown inFigure 1-29 on

page 1-31.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 117 118

Sin comentarios

Qlogic QLA4010 Guía de instalación Pagina 46